Our Products – Grid Layout

THERMO-KON-HV TYPE CONDENSERS

HV type condensers are designed with the fans on top or side. Condensers work horizontally or vertically. It has special feet that can be adjusted in height. Pipe connections are manufactured as right and left sided.

THERMO-KON-W TYPE CONDENSERS

W type condensers are designed with the fans on top. Condensers work horizontally. It provides easy assembly with its specially designed carrier base. Copper pipe connections can be made optionally with right and left connections.

THERMO-KON CH HORIZONTAL TYPE CONDENSER

In TERMO-KON CH Series horizontal type condensing units, the condenser is in the horizontal position in the middle of the case. There are mounting places for axial type fans above the condensate.

THERMO-KON CV VERTICAL TYPE CONDENSER

In TERMO-KON CV Series vertical type condensing units, the condenser is located horizontally on the side of the case. There are mounting places for axial type fans in front of the condensate.

THERMO-KON CA ANGLE TYPE CONDENSER

In TERMO-KON CA Series angled type condensing units, the condenser is mounted inside the case at an angle, so that sufficient mounting space for the compressor and cooling circuit elements is created

THERMO-CON OPEN

TERMO-KON OPEN Type commercial type condensers are produced in parallel with compressor powers according to 3/8 25-22 or 32-28 geometry.

PENGUA-S EVOPERATORS

PENGUA-S Series evaporators are manufactured from galvanized steel material and are painted with RAL 9010 electrostatic paint as standard.

TERMO-X DX COIL

Dx evaporators air handling units Pool dehumidification units are widely used for rooftop and other special needs. Dx coils are manufactured in 2 to 12 rows according to the capacity requirement.

  • 1
  • 2